This is the old website of JWL. Please follow this link to enter the new:

http://www.jwl.dk/en/

Sodablæsning er en hurtig og skånsom metode til at fjerne lak, maling & overflade rust - selv fra svært tilgængelige steder.

Sodablasters


JWL Sodablasters
Clean or remove without damaging


Sodablasting is a fast and gentle method of removing paint, varnish and surface rust – even from hard to reach places.
JWL Sodablaster 2 is an enhancement of our successful Sodablasting gun. The nozzle is already set for the optimal output, and it is possible to replace the precision nozzle. A high performance wide nozzle is also available as additional fitting (article no. 145955-000).
The JWL Sodablaster 2 is equipped with a practical, refillable container (1,2 L).
JWL Sodablasting Set is an effective and powerful sodablaster for the larger tasks. The Sodablasting Set enables you to adjust the airflow and soda flow independently.
JWL Sodablasters are suitable for hobby as well as professional use.


Sodablasting…
-   neither warms up nor stretches the sheet metal
-   does not damage glass, rubber or plastic which means
    minimal need for shielding
-   protects the bare metal from rusting away in contrast to
    sandblasting
-   removes anti-fouling paint from boats without damaging the
    hull
-   removes varnish and doesn’t damage seals (rubber or
    plastic)
-   removes paint from glass surfaces or window frames
    without damaging the glass or rubber seals
-   removes varnish from wooden furniture
-   is gentle and environmentally friendly

Se also our sodablasters in use here at sodablaster.dk

Always use P2 respiratory protection, hearing protection and eye- and facemask when blasting with soda. Blasting soda is pure NaHCO3 (baking soda). It is not dangerous, but may be harmful if inhaled as dust.
To get the wanted result, always use soda specifically intended for blasting.



JWL "Soda Blasting Media" is soda (Natriumbicarbonat) specially intended for blasting with sodablasters. JWL Soda Blasting Media is available in both 5 litre containers (320103-000) and 25 kg bags (320101-000).

Technical description


Connection1/4" internal thread
Working pressure6 - 12 Bar (87 - 174 psi)
Container1,2 litre (145150)

Air consumption 145154

Minimum 180 L air/min. at 8 Bar
Air consumption 145110Minimum 450 L air/min. at 8 Bar

Materials


Handle & triggerAcetal plastic
ValveAcetal plastic
Gaskets / O-ringsNitrile
SpringHardened spring wire
ContainerPEHD

Sodablaster video

Sodablasting Set video

Variants

   JWL Sodablasters
145100-000
145110-000
   Accessories
320100-000
Code No.

JWL Sodablaster 2 with a precision nozzle and 1,2 liter container

A high-performance Wide-nozzle is available as additional fitting (article no. 145955-000).
NB requires a compressor with a capacity of at least 2.5 HP / 180 l/min

145154-000

JWL Sodablasting Set - for the larger tasks

Enables separate adjustment of air and soda volume.
NB requires a compressor with a capacity of at least 5.5 HP / 450 l/min

145110-000
Code No.

Soda specifically intended for blasting. 5 litre

Safety data sheet - soda blasting media: UK NL USA GRC ITALY NO SE ES F SF AUS

320103-000

Soda specifically intended for blasting.  25 kg

Safety data sheet - soda blasting media: UK NL USA GRC ITALY NO SE ES F SF AUS

320101-000
Precision nozzle JWL Sodablaster 2 (145154-000) in Hard. steel, el.galv.145950-000
Wide nozzle to 145154-000 in POM - 3 pcs145955-000
Steel nozzle with o-ring for Sodablasting Set (145110-000)145803
Container 1,2 Litre143200

Safety data sheet - soda blasting media

UK NL USA GRC ITALY NO SE ES